NETGEAR M4300 User Manual page 623

M4300 Series and M4300-96X Fully Managed Switches User Manual
Table 218. Port Detailed Statistics (continued)
Field
Link Status
Link Trap
Packets RX and TX 64
Octets
Packets RX and TX 65-127
Octets
Packets RX and TX 128-255
Octets
Packets RX and TX 256-511
Octets
Packets RX and TX 512-1023
Octets
Packets RX and TX
1024-1518 Octets
Packets RX and TX
1519-2047 Octets
Packets RX and TX
2048-4095 Octets
Packets RX and TX
4096-9216 Octets
Octets Received
Packets Received 64 Octets
Packets Received 65-127
Octets
Packets Received 128-255
Octets
Description
Indicates whether the link is up or down.
Indicates whether or not the port sends a trap when link status changes.
The total number of packets (including bad packets) received or transmitted that
were 64 octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 1024 and 1518 octets in length inclusive (excluding framing bits
but including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 1519 and 2047 octets in length inclusive (excluding framing bits
but including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 2048 and 4095 octets in length inclusive (excluding framing bits
but including FCS octets).
The total number of packets (including bad packets) received or transmitted that
were between 4096 and 9216 octets in length inclusive (excluding framing bits
but including FCS octets).
The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets). This object can be
used as a reasonable estimate of Ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets objects must be sampled
before and after a common interval.
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
Monitor the System
623