Configure The Ospfv3 Area Range; Configure The Ospfv3 Interface - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Configure the OSPFv3 Area Range


To configure the OSPFv3 area range:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Routing > OSPFv3 > Advanced > Area Range Configuration.
5.
Enter the OSPFv3 Area ID.
6.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
Enter the IPv6 Prefix for the address range for the selected area.
7.
From the list in the LSDB Type field, select the type of link advertisement associated with
8.
the specified area and address range.
Options are: Network Summary or NSSA External. The default type is Network
Summary.
In the Advertise field, select the Enable or Disable option.
9.
If you select Enable, the address range is advertised outside the area through a network
summary LSA. The default is Enable.
Click the Add button.
10.
The new address range is added to the switch.

Configure the OSPFv3 Interface


To configure the OSPFv3 interface:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
OSPF and OSPFv3
388