Configure Vlan Trunking - NETGEAR M4300 User Manual

Fully managed stackable switches
Hide thumbs Also See for M4300:
Table of Contents

Advertisement

M4300 Series and M4300-96X Fully Managed Switches User Manual
Select Switching> VLAN > Advanced > VLAN Configuration.
5.
In the Internal VLAN Allocation Base field, specify the VLAN allocation base for the routing
6.
interface.
You can enter a value from 1 to 4093.
Select the Internal VLAN Allocation Policy Ascending or Descending radio button.
7.
This specifies a policy for the internal VLAN allocation.
Click the Apply button.
8.
Your settings are saved.

Configure VLAN Trunking

You can configure switchport mode settings on interfaces. The switchport mode defines the
purpose of the port based on the type of device it connects to and constraints the VLAN
configuration of the port accordingly. Assigning the appropriate switchport mode helps
simplify VLAN configuration and minimize errors.
To configure VLAN trunking:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Configure Switching Information
182

Advertisement

Table of Contents
loading

This manual is also suitable for:

M4300-96x

Table of Contents