NETGEAR M4300 User Manual page 62

M4300 Series and M4300-96X Fully Managed Switches User Manual
If you need to reset the IPv4 management interface, in the Reset IPv4
Note:
Management Interface section of the page, use the Set Management
Interface to Default option to delete the port-based IPv4
management interface configuration and set the IPv4 management
interface back to the default VLAN 1.
Click the Apply button.
12.
Your settings are saved.
The Current IPv4 Management Interface Status is displayed at the bottom of the page.
The table below describes the nonconfigurable fields.
Table 17. Nonconfigurable IPv4 Management Interface Status
Field
Management Interface
Link State
Routing Interface Status
MAC Address
IP Address Configuration Method
IP Address
Subnet Mask
Gateway
Description
Displays the current IPv4 management interface
Indicates whether the link status is up or down.
Indicates whether the link status is up or down for the management
interface.
The MAC address assigned to the management interface.
Indicates whether the IP address configuration method is DHCP or
manual.
The IP address of the management interface.
The IP subnet mask for the management interface.
The specified default gateway for the management interface.
Configure System Information
62