NETGEAR M4300 User Manual page 86

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable fields.
Table 27. Green Ethernet Local Device information
Field
Cumulative Energy Saved on this
port due to Green mode(s) (Watts
* Hours)
Rx Low Power Idle Event Count
Rx Low Power Idle Duration
(uSec)
Tx Low Power Idle Event Count
Tx Low Power Idle Duration
(uSec)
Tw_sys_tx (uSec)
Tw_sys_tx Echo (uSec)
Tw_sys_rx (uSec)
Tw_sys_rx Echo (uSec)
Fallback Tw_sys (uSec)
Tx_dll_enabled
Tx_dll_ready
Rx_dll_enabled
Rx_dll_ready
Time Since Counters Last Cleared Time Since Counters Last Cleared (since the time of power up, or after
Description
Cumulative energy saved due to all green modes enabled on this port
in (Watts * Hours).
This field is incremented each time MAC RX enters low-power idle
(LPI) state. Shows the total number of Rx LPI events since EEE
counters were last cleared.
This field indicates duration of Rx LPI state in 10 us increments. Shows
the total duration of Rx LPI since the EEE counters were last cleared.
This field is incremented each time MAC TX enters LPI state. Shows
the total number of Tx LPI events since EEE counters were last
cleared.
This field indicates duration of Tx LPI state in 10 us increments. Shows
the total duration of Tx LPI since the EEE counters were last cleared.
Integer that indicates the value of Tw_sys that the local system can
support.
Integer that indicates the remote system's Transmit Tw_sys that was
used by the local system to compute the Tw_sys that it wants to
request from the remote system.
Integer that indicates the value of Tw_sys that the local system
requests from the remote system.
Integer that indicates the remote system's Receive Tw_sys that was
used by the local system to compute the Tw_sys that it can support.
Integer that indicates the value of fallback Tw_sys that the local system
requests from the remote system.
Data Link Layer Enabled: Initialization status of the EEE transmit Data
Link Layer management function on the local system.
Data Link Layer ready: This variable indicates that the tx system
initialization is complete and is ready to update/receive LLDPDU
containing EEE TLV.
Status of the EEE capability negotiation on the local system.
Data Link Layer ready: This variable indicates that the rx system
initialization is complete and is ready to update/receive LLDPDU
containing EEE TLV.
EEE counters are cleared).
Configure System Information
86