NETGEAR M4300 User Manual page 626

M4300 Series and M4300-96X Fully Managed Switches User Manual
Table 218. Port Detailed Statistics (continued)
Field
Maximum Frame Size
Total Packets Transmitted
Successfully
Unicast Packets Transmitted
Multicast Packets
Transmitted
Broadcast Packets
Transmitted
Total Transmit Errors
Total Transmit Packets
Discarded
Single Collision Frames
Multiple Collision Frames
Excessive Collision Frames
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
802.3x Pause Frames
Transmitted
GVRP PDUs Received
GVRP PDUs Transmitted
GVRP Failed Registrations
GMRP PDUs Received
GMRP PDUs Transmitted
Description
The maximum Ethernet frame size the interface supports or is configured to use,
including Ethernet header, CRC, and payload. (1518 to 9216). The default
maximum frame size is 1518.
The number of frames that were transmitted by this port to its segment.
The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not
sent.
The total number of packets that higher-level protocols requested be transmitted
to a multicast address, including those that were discarded or not sent.
The total number of packets that higher-level protocols requested be transmitted
to the broadcast address, including those that were discarded or not sent.
The sum of single, multiple, and excessive collisions.
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
A count of frames for which transmission on a particular interface fails due to
excessive collisions.
Number of STP BPDUs received at the selected port.
Number of STP BPDUs transmitted from the selected port.
Number of RSTP BPDUs received at the selected port.
Number of RSTP BPDUs transmitted from the selected port.
Number of MSTP BPDUs received at the selected port.
Number of MSTP BPDUs transmitted from the selected port.
A count of MAC control frames transmitted on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
The count of GVRP PDUs received in the GARP Layer.
The count of GVRP PDUs transmitted from the GARP Layer.
The number of times attempted GVRP registrations could not be completed.
The count of GMRP PDUs received from the GARP Layer.
The count of GMRP PDUs transmitted from the GARP Layer.
Monitor the System
626