View The Daylight Saving Time Status - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Table 21. DayLight Saving - Recurring
Field
Offset
Zone
The fields in the following table are visible only when DayLight Saving is Non Recurring.
Table 22. DayLight Saving - Non Recurring
Field
Begins At
Ends At
Offset
Zone

View the DayLight Saving Time Status


To view the DayLight Saving Time status:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Management > Time > DayLight Saving Configuration.
5.
Description
Configure recurring offset in minutes. The valid range is 1–1440
minutes.
Configure the time zone.
Description
These fields are used to configure the start values of the date and time.
Week. Configure the start week.
•
Day. Configure the start day.
•
Month. Configure the start month.
•
Hours. Configure the start hours.
•
Minutes. Configure the start minutes.
•
These fields are used to configure the end values of date and time.
Week. Configure the end week.
•
Day. Configure the end day.
•
Month. Configure the end month.
•
Hours. Configure the end hours.
•
Minutes. Configure the end minutes.
•
Configure the non-recurring offset in minutes. The valid range is
1–1440 minutes.
Configure the time zone.
Configure System Information
75