NETGEAR M4300 User Manual page 304

M4300 Series and M4300-96X Fully Managed Switches User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Routing> IP > Advanced > Secondary IP.
5.
In the Routing Interface list, select the interface.
6.
In the Secondary IP Address field, add a secondary IP address to the selected interface.
7.
In the Secondary IP Subnet Mask field, enter the subnet mask associated with the
8.
secondary IP address.
This is also referred to as the subnet/network mask, and defines the portion of the
interface's IP address that is used to identify the attached network. This value is read-only
once configured.
Click the Add button.
9.
The secondary IP address for the selected interface is added.
The following table describes the nonconfigurable information that is displayed.
Table 109. Secondary IP
Field
VLAN ID
Primary IP Address
Description
The VLAN ID associated with the displayed or configured interface.
The primary IP address for the interface.
Routing
304