NETGEAR M4300 User Manual page 510

M4300 Series and M4300-96X Fully Managed Switches User Manual
Select the Admin Mode Disable or Enable radio button.
6.
This enables or disables the administrative mode of Secure HTTPS. The currently
configured value is displayed. The default value is Disable. You can download SSL
certificates only when the HTTPS admin mode is disabled. HTTPS admin mode can be
enabled only if a certificate is present on the device.
Select the SSL Version 3 Disable or Enable radio button.
7.
This enables or disables Secure Sockets Layer version 3.0. The currently configured
value is displayed. The default value is Enable.
Select the TLS Version 1 Disable or Enable radio button
8.
This enables or disables Transport Layer Security version 1.0. The currently configured
value is displayed. The default value is Enable.
In the HTTPS Port field, type the HTTPS port number.
9.
The value must be in the range of 1025 to 65535. Port 443 is the default value. The
currently configured value is displayed.
In the HTTPS Session Soft Timeout (Minutes) field, enter the inactivity time-out for HTTPS
10.
sessions.
The value must be in the range of 1 to 60 minutes. The default value is 5 minutes. The
currently configured value is displayed.
In the HTTPS Session Hard Timeout (Hours) field, set the hard time-out for HTTPS
11.
sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is
displayed.
In the Maximum Number of HTTPS Sessions field, enter the maximum allowable number
12.
of HTTPS sessions.
The value must be in the range of 0 to 16. The default value is 16. The currently
configured value is displayed.
Manage Device Security
510