Configure The Cpu Thresholds - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes CPU Memory Status information.
Table 10. CPU Memory Status information
Field
Total System Memory
Available Memory

Configure the CPU Thresholds

The CPU Utilization Threshold notification feature allows you to configure thresholds that,
when crossed, trigger a notification. The notification is done through SNMP trap and syslog
messages.

To configure the CPU thresholds:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Management > System CPU Status > CPU Threshold.
5.
Configure the Rising Threshold value.
6.
Notification is generated when the total CPU utilization exceeds this threshold value over
the configured time period. The range is 1 to 100.
Configure the Rising Interval value.
7.
This utilization monitoring time period can be configured from 5 to 86400 seconds in
multiples of 5 seconds.
Description
The total memory of the switch in KBytes.
The available memory space for the switch in KBytes.
Configure System Information
43