Download A File From A Usb Device - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Click the Apply button.
9.
The download begins.
The Download Status field displays the status during transfer file to the switch.
After a file transfer is started, wait until the page refreshes. When the
Note:
page refreshes, the Select File option is blanked out. This indicates
that the file transfer is done.

Download a File from a USB Device


To download a file from a USB device:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Maintenance > Upgrade> USB File Upgrade.
5.
Use File Type to specify what type of file to download:
6.
Software. Software code to download to the operational flash.
•
Text Configuration. Configuration s in text mode to update the switch's configuration
•
(Startup-config).
If the file has errors, the update is stopped. The factory default is Software.
Use Image Name to select one of the images from the list:
7.
Image1. Select image1 to download to image1.
•
Image2. Select image2 to download to image2.
•
Only when File Type Software is selected is the Image Name field visible.
Maintenance and Troubleshooting
667