NETGEAR M4300 User Manual page 49

M4300 Series and M4300-96X Fully Managed Switches User Manual
For model M4300-96X, if you changed the settings, click the Apply button.
8.
Your settings are saved.
The following table describes the nonconfigurable information in the Slot Configuration
table.
Field
Slot
Status
Power State
Configured Card Description
Inserted Card Model ID
Inserted Card Description
Card Power Down
Card Pluggable
PoE Capable
The following table describes information in the Supported Card table.
Field
Card Model
Card Index
Card Type
Card Descriptor
Description
The unit and slot number.
Indicates whether the slot is empty or full.
For model M4300-96X only, the power state is always Enable.
For other models, the Power State column does not display.
The description of the port card configured for the slot
The model ID of the port card plugged into the slot.
The description of the port card plugged into the slot.
If the value is True, the power state can be administratively enabled or
disabled. If the value is False, the power state cannot be configured.
If the value is True, the card can be administratively enabled or disabled. If
the value is False, the administrative state cannot be configured.
Indicates whether a port card is PoE cable.
Description
The model ID of the supported port card.
The index assigned to the port card type.
The hardware type of the supported port card, which is assigned by the
manufacturer.
The description of the supported port card, which includes the manufacturer
product number and information about the number and speed of the
supported interfaces.
Configure System Information
49