NETGEAR M4300 User Manual page 654

M4300 Series and M4300-96X Fully Managed Switches User Manual
A sampling interval of 0 disables counter sampling. The Allowed range is 0 to 86400
seconds.
Use Sampler Receiver Index to specify the sFlow receiver for this flow sampler.
9.
If set to 0, the sampler configuration is set to default and the sampler is deleted. Only
active receivers can be set. If a receiver expires, then all samplers associated with the
receiver also expires. The allowed range is 1 to 8.
Use Sampling Rate to specify the statistical sampling rate for packet sampling from this
10.
source.
A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The
allowed range is 1024 to 65536.
Use Maximum Header Size to specify the maximum number of bytes to be copied from a
11.
sampled packet.
The allowed range is 20 to 256.
Click the Apply button.
12.
Your settings are saved.
Monitor the System
654