NETGEAR M4300 User Manual page 89

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable fields.
Table 29. Green Ethernet Statistics Summary
Field
Current Power Consumption /Stack
(mWatts)
Percentage Power Saving /Stack
(%)
Cumulative Energy Saving /Stack
(Watts * Hours)
The following table describes the nonconfigurable fields.
Table 30. Green Ethernet Feature Summary
Field
Unit
Green Features supported on this
unit
Interface
Energy Detect Admin mode
Energy Detect Operational Status
Short Reach Admin mode
Short Reach Operational Status
EEE Admin mode
Description
Power Consumption by all ports in switch in mWatts (mW).
Percentage of power saved on all ports in switch when Green mode is
enabled.
Cumulative energy saved per switch in (watts * hour) when all green
modes are enabled.
Description
The Unit ID.
List of green features supported on the given unit, which could be one or
more of the following:
EEE (Energy Efficient Ethernet)
•
LPI-History (EEE Low Power Idle History)
•
LLDP-Cap-Exchg (EEE LLDP Capability Exchange)
•
Pwr-Usg-Est (Power Usage Estimates).
•
Interface for which data is displayed or configured.
Enable or disable Energy Detect mode on the port. When this mode is
enabled, when the port link is down, the PHY automatically goes down for a
short period of time, then wakes up to check link pulses. This allows the
switch to perform autonegotiation and save power consumption when no
link partner is present.
Current operational status of the Energy Detect mode.
Enable or disable Short Reach Admin mode on the port. With Short Reach
mode enabled, PHY is forced to operate in low power mode irrespective of
the cable length.
Current operational status of the Short Reach mode.
Enable or disable Energy Efficient Ethernet mode on the port. With EEE
mode enabled, the port transitions to low power mode during link idle
conditions.
Configure System Information
89