Configure Dhcpv6 Interface Settings - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Services > DHCPv6 Server > DHCPv6 Prefix Delegation
5.
Configuration.
Select from the list of configured Pool Names.
6.
In the Prefix and Prefix Length fields, specify the delegated IPv6 prefix.
7.
In the DUID field, specify the DUID identifier used to identify the client's unique DUID value.
8.
Specify the Client Name, which is useful for logging or tracing only.
9.
The name can be up to 31 alphanumeric characters.
Specify the Valid Lifetime in seconds for the delegated prefix.
10.
Valid values are 0 to 4294967295.
Specify the Prefer Lifetime in seconds for the delegated prefix.
11.
Valid values are 0 to 4294967295.
Click the Add button.
12.
The delegated prefix is added for the selected pool.
Click the Apply button.
13.
Your settings are saved.

Configure DHCPv6 Interface Settings

You can configure the per-interface settings for DHCPv6. The DHCPv6 interface modes are
mutually exclusive. The fields that can be configured on this page depend on the selected
mode for the interface.
To configure DHCPv6 Interface settings:

Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
Configure System Information
112