View An Isdp Neighbor - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Use Port to select the port on which the admin mode is configured.
6.
Use Admin mode to enable or disable ISDP on the port.
7.
The default value is Enable.
Click the Apply button.
8.
Your settings are saved.

View an ISDP Neighbor


To view an ISDP neighbor:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > ISDP > Advanced > Neighbor.
5.
Configure System Information
154