NETGEAR M4300 User Manual page 456

M4300 Series and M4300-96X Fully Managed Switches User Manual
In the Source IP field, enter the IP address that identifies the multicast packet source for the
6.
entry you are creating.
In the Prefix Length field, enter the prefix length to be applied to the Source IPv6 address.
7.
In the RPF Neighbor field, enter the IP address of the neighbor router on the path to the
8.
source.
In the Metric field, enter the link state cost of the path to the multicast source.
9.
The range is 0 to 255; the default is 1. You can change the metric for a configured route
by selecting the static route and editing this field.
Select the interface number from the RPF Interface list.
10.
This is the interface that connects to the neighbor router for the given source IP address.
Click the Add button.
11.
The static route is added to the switch.
Click the Apply button.
12.
Your settings are saved.
Multicast Routing
456