View Port Transceiver Information - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

View Port Transceiver Information

You can view the transceiver information for all fiber ports on the switch

To view port transceiver information:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching > Ports > Port Transceiver.
5.
Select Unit ID to display physical ports of the selected unit or select All to display physical
6.
ports of all units.
To refresh the page with the latest information on the switch, click the Update button.
7.
The following describes the nonconfigurable information that is displayed.
Table 97. Port Transceiver
Field
Port
Vendor Name
Link Length 50 μm
Link Length 62, 5 μm
Serial Number
Part Number
Nominal Bit Rate
Revision
Compliance
Description
The interface for which data is to be displayed.
Vendor name of the SFP.
Link length supported for 50 μm fiber.
Link length supported for 62, 5 μm fiber.
Serial number of the SFP.
Part number of the SFP.
Nominal signalling rate for SFP.
Vendor revision of the SFP.
Compliance of the SFP.
Configure Switching Information
267