Add A Static Entry To The Local Dns Table - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table displays DNS Server Configuration information.
Table 24. DNS Server Configuration
Field
Serial No
Preference

Add a Static Entry to the Local DNS Table

You can manually map host names to IP addresses or to view dynamic DNS mappings.

To add a static entry to the local DNS table:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select System > Management > DNS > Host Configuration.
5.
In the Host Name (1 to 255 characters) field, specify the static host name to add.
6.
Its length cannot exceed 255 characters and it is a mandatory field.
In the IP Address field, enter the IP address in standard IPv4 dot notation to associate with
7.
the host name.
Click the Add button.
8.
The entry appears in the list on the page.
Description
The sequence number of the DNS server.
Shows the preference of the DNS server. The preference is determined
by the order in which they were entered.
Configure System Information
79