Configure An Rspan Source Switch - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
Select Monitoring > Mirroring > RSPAN VLAN.
5.
The VLAN ID column lists all VLANs on the device.
Select the VLAN to use as the RSPAN VLAN.
6.
In the Admin Mode list, select to Enable or Disable RSPAN support on the corresponding
7.
VLAN.
The default value is Disable.
Click the Apply button.
8.
Your settings are saved.

Configure an RSPAN Source Switch


To configure an RSPAN source switch:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Monitoring > Mirroring > RSPAN Source Switch Configuration.
5.
Monitor the System
644