Configure An Ipv6 Acl - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Configure an IPv6 ACL

An IPv6 ACL consists of a set of rules that are matched sequentially against a packet. When
a packet meets the match criteria of a rule, the specified rule action (permitted or denied) is
taken, and the additional rules are not checked for a match.
You must specify the interfaces to which an IP ACL applies and select whether the IP ACL
applies to inbound or outbound traffic.

To configure an IPv6 ACL:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Security > ACL > Advanced > IPv6 ACL.
5.
In the IPv6 ACL field in the IPv6 ACL Table, specify the name for the IPv6 ACL.
6.
This is the IPv6 ACL name string, which includes up to 31 alphanumeric characters only.
The name must start with an alphabetic character.
Click the Add button.
7.
The IPv6 ACL is added to the switch configuration.
Manage Device Security
607