NETGEAR M4300 User Manual page 372

M4300 Series and M4300-96X Fully Managed Switches User Manual
In the Area ID field, enter the OSPF area ID.
6.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
Virtual links can be configured between any pair of area border routers having interfaces
to a common (non-backbone) area.
Configure the Neighbor Router ID by entering the neighbor portion of a virtual link
7.
specification.
Virtual links can be configured between any pair of area border routers having interfaces
to a common (non-backbone) area.
In the Hello Interval field, enter the OSPF hello interval for the specified interface in
8.
seconds.
This parameter must be the same for all routers attached to a network. The valid values
range from 1 to 65,535. The default is 10 seconds.
In the Dead Interval field, enter the OSPF dead interval for the specified interface in
9.
seconds.
This specifies how long a router waits to see a neighbor router's hello packets before
declaring that the router is down. This parameter must be the same for all routers
attached to a network. This value must be a multiple of the hello interval (for example, 4).
The valid values range from 1 to 65,535. The default is 40.
In the Iftransit Delay Interval field, enter the OSPF transit delay for the specified interface.
10.
This specifies the estimated number of seconds it takes to transmit a link state update
packet over the selected interface. The valid values range from 1 to 3600 seconds (1
hour). The default value is 1 second.
In the Retransmit Interval field, enter the OSPF retransmit interval for the specified
11.
interface.
This is the number of seconds between link state advertisements for adjacencies
belonging to this router interface. This value is also used when retransmitting database
descriptions and link state request packets. The valid values range from 1 to 3600
seconds (1 hour). The default is 5 seconds.
OSPF and OSPFv3
372