View The Port Statistics - NETGEAR Nighthawk SX10 Pro Gaming User Manual

Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select DIAGNOSTICS.
The CABLE TEST page displays.
5. From the menu on the left, select PORT MIRRORING.
The PORT MIRRORING page displays.
6. Disable or enable port mirroring by clicking the button.
When port mirroring is enabled, the button bar displays green. By default, port
mirroring is disabled and the button bar displays white.
After you enable port mirroring, you must specify the ports.
7. In the upper port section, select one or more source ports by clicking the port icons.
The icon for a selected port displays purple.
You cannot select a source port that is a member of a LAG.
8. In the lower port section, select the single destination port by clicking the port icon.
The icon for a selected port displays purple.
You cannot select a destination port that is a member of a LAG.
9. Click the APPLY button.
Your settings are saved.

View the Port Statistics

You can view port statistics for each of the 10 ports, including the bytes received, bytes
sent, and cyclic redundancy check (CRC) error packets, which are packets with errors
or corrupt packets.
To view or clear the port statistics.
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
Diagnostics and
Troubleshooting
105 User Manual