Search For Dvmrp Neighbors - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual

Search for DVMRP Neighbors


To search for DVMRP neighbors:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Routing> Multicast > DVMRP > DVMRP Neighbor.
5.
Use the Search menu to search for neighbor entries by MAC interface or neighbor IP
6.
address:
Select Interface from the menu, enter the interface in unit/slot/port format (for
•
example 1/0/13), and click the Go button.
If the neighbor entry exists, the entry is displayed as the first entry, followed by the
remaining entries.
Select Neighbor IP from the menu, enter the neighbor IP address, and click the Go
•
button.
If the entry with the matching neighbor IP exists, the entry is displayed as the first
entry, followed by the remaining entries. An exact match is required.
The following table describes the nonconfigurable information that is displayed.
Table 153. DVMRP Neighbor
Field
Interface
Neighbor IP
State
Up Time
Description
Select the interface for which data is to be displayed, or all the
interfaces are displayed.
The IP address of the neighbor whose information is displayed
The state of the specified neighbor router on the selected interface,
either active or down.
The DVMRP uptime for the specified neighbor on the selected
interface. This is the time since the neighbor entry was learned.
Multicast Routing
412