NETGEAR M4300 User Manual page 587

M4300 Series and M4300-96X Fully Managed Switches User Manual

To use the ACL Wizard to create a simple ACL:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Security > ACL > ACL Wizard.
5.
The steps in this procedure describe creating an ACL based on the
Note:
destination MAC address. If you select a different ACL type, for
example, ACL based on a source IPv4, then what is shown on this
page varies, depending on the current step in the rule configuration
process.
Use ACL Type to specify the ACL type you are using to create the ACL.
6.
You can select one type from 10 optional types:
ACL Based on Destination MAC. To create an ACL based on the destination MAC
•
address, destination MAC mask, and VLAN.
ACL Based on Source MAC. To create an ACL based on the source MAC address,
•
source MAC mask, and VLAN.
Manage Device Security
587