NETGEAR M4300 User Manual page 652

M4300 Series and M4300-96X Fully Managed Switches User Manual
Next to the Receiver Index columns, select the check box for the receiver for which data
6.
must be displayed or configured.
The allowed range to 1 to 8.
In the Receiver Owner field, specify the receiver owner.
7.
This is the entity making use of this sFlowRcvrTable entry. The empty string indicates that
the entry is currently unclaimed and the receiver configuration is reset to the default
values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is
unclaimed before trying to claim it. The entry is claimed by setting the owner string. The
entry must be claimed before any changes can be made to other sampler objects.
In the Receiver Timeout field, specify the time (in seconds) remaining before the sampler is
8.
released and stops sampling.
A management entity wanting to maintain control of the sampler is responsible for setting
a new value before the old one expires. The valid range is 0 to 2147483647. A value of
zero essentially means the receiver is not configured and sets the selected receiver
configuration to its default values. When configuring the sFlow receiver settings, you must
select the Timeout Mode option before you can configure a Timeout Value.
From the No Timeout menu, select True or False to set the no time-out sampling for the
9.
receiver.
Sampling is not stopped until the No Timeout selected entry is True. The default value is
False.
In the Maximum Datagram Size field, specify the maximum number of data bytes that can
10.
be sent in a single sample datagram.
Set this value to avoid fragmentation of the sFlow datagrams. The default value is 1400.
The allowed range is 200 to 12188.
In the Receiver Address field, specify the IP address of the sFlow collector.
11.
If set to 0.0.0.0, no sFlow datagrams are sent.
In the Receiver Port field, specify the destination port for sFlow datagrams.
12.
The allowed range is 1 to 65535.
The Receiver Datagram Version field displays the version of sFlow datagrams to be sent.
13.
Click the Apply button.
14.
Your settings are saved.
Monitor the System
652