Version Information; Relationship Between The Unit Versions Of Ethercat Coupler Unit; A-7-2 Relationship Between Unit Versions Of Ethercat Coupler Unit And Cpu Units; A-7-1 Relationship Between The Unit Versions Of Ethercat Coupler Unit And - Omron NX-ECC201 User Manual

A-7 Version Information
This section describes the relationship between the EtherCAT Coupler Unit version and the versions of
the Sysmac Studio and the NJ-series CPU Units.
A-7-1 Relationship between the Unit Versions of EtherCAT Coupler
Unit and Sysmac Studio Versions
The following table shows the relationship between the unit versions of the EtherCAT Coupler Unit and
the Sysmac Studio versions.
Model number of EtherCAT Cou-
pler Unit
NX-ECC201
A-7-2 Relationship between Unit Versions of EtherCAT Coupler Unit
and CPU Units
The following table shows the relationship between the unit versions of the EtherCAT Coupler Unit and
the CPU Unit.
Model number of EtherCAT Cou-
pler Unit
NX-ECC201
Precautions for Correct Use
On the Select Device Tab Page in the project on the Sysmac Studio, select version 1.05 or later
for the CPU Unit version. You cannot use the EtherCAT Coupler Unit if you select 1.04 or earlier
for the Unit version.
NX-series EtherCAT Coupler Unit User's Manual (W519)
(Yes: Can be used. No: Cannot be used.)
Unit Version
1.0
(Yes: Can be used. No: Cannot be used.)
Unit Version
1.0
Appendices
Sysmac Studio version
1.05 or lower
No
Unit version of
NJ501-/NJ301- CPU Unit
1.04 or lower
No
1.06
Yes
A
1.05
Yes
A - 59