End Cover Specifications - Omron NX-ECC201 User Manual

Item
Terminal arrangement
Accessory
*1. This specification applies to a connection to the built-in EtherCAT port on an NJ-series CPU Unit.
*2. This depends on the specifications of the EtherCAT master. The values are as follows when the EtherCAT
Coupler Unit is connected to the built-in EtherCAT port on an NJ5-series CPU Unit: 500 μs, 1,000 μs, 2,000
μs, and 4,000 μs. Refer to the NJ-series CPU Unit Built-in EtherCAT Port User's Manual (Cat. No. W505) for
the most recent specifications.
*3. This depends on the Unit configuration.
3-1-3

End Cover Specifications

Item
Model
Dimensions
Weight
NX-series EtherCAT Coupler Unit User's Manual (W519)
3 Specifications and Application Procedures
A1
UV
Unit power supply
(24 VDC)
UG
IOV
I/O power supply
(5 to 24 VDC)
Ground to 100 Ω
A8
or less.
End Cover (NX-END01): 1
NX-END01
12 × 103 × 71 (W×H×D)
35 g max.
Specification
B1
Through-wiring
for unwired
UV
terminals.
UG
IOG
B8
Specification
3
3 - 5