Table of Contents
Advertisement
Unit Versions
• Hardware version
• Software version
The software version is displayed only for Units that contain software.
Unit Versions and Sysmac Studio Versions
The functions that are supported depend on the unit version of the Unit. The version of Sysmac Studio
that supports the functions that were added for an upgrade is also required to use those functions.
Refer to A-7 Version Information on page A-59 for the functions that are supported by each unit version.
Unit Version Notation
In this User's Manual, unit versions are specified as shown in the following table.
Unit version in Unit specifications
on the product
Unit version 1.0 or later
28
Notation in this manual
Ver. 1. or later
Unless unit versions are specified, the infor-
mation in this manual applies to all unit ver-
sions.
NX-series EtherCAT Coupler Unit User's Manual (W519)
Remarks
Advertisement
Table of Contents
Troubleshooting
