Nx Units - Omron NX-ECC201 User Manual

4-1-2

NX Units

This section provides an example of an NX Unit.
Refer to the user's manual for each NX Unit for specific information.
(A)
Letter
(A) Marker attachment locations
(B) NX bus connector
(C) Unit hookup guides
(D) DIN Track mounting hooks
(E) Protrusions for removing the
Unit
(F) Indicators
(G) Terminal block
(H) Unit specifications
NX-series EtherCAT Coupler Unit User's Manual (W519)
(B) (C) (D) (E)
(H) (C) (E)
Name
The locations where markers are attached. The markers made by
OMRON are installed for the factory setting. Commercially available
markers can also be installed.
This connector is used to connect each Unit.
These guides are used to connect two Units.
These hooks are used to mount the NX Unit to a DIN Track.
The protrusions to hold when removing the Unit.
The indicators show the current operating status of the Unit.
The terminal block is used to connect external devices.
The number of terminals depends on the type of Unit.
The specifications of the Unit are given.
4 Part Names and Functions
(C)
(F)
(G)
(C)
Function
(B)
4 - 3
4