Omron NX-ECC201 User Manual page 148

7 Wiring
Conductor length (stripping length)
Precautions for Correct Use
• Use cables with suitable wire sizes for the carrying current. There are also restrictions on the
current due to the ambient temperature. Refer to the manuals for the cables and use the
cables correctly for the operating environment.
• For twisted wires, strip the sheath and twist the conductor portion. Do not unravel or bend the
conductor portion of twisted wires or solid wires.
NG
Unravel wires
Connecting/Removing Wires
This section describes how to connect and remove wires.
 Terminal Block Parts and Names
 Required Tools
Use a flat-blade screwdriver to connect and remove wires.
Use the following flat-blade screwdriver.
Side view
8 to 12°
0.4 mm
7 - 16
Release hole
Terminal hole
Front view
2.5-mm dia.
2.5 mm
NG
Bend wires
NX-series EtherCAT Coupler Unit User's Manual (W519)