Removing Units - Omron NX-ECC201 User Manual

6 Installation
6-1-9

Removing Units

Precautions for Safe Use
Always turn OFF the power supply before removing any Unit.
If the power supply is not OFF, the Unit may malfunction or may be damaged.
Precautions for Correct Use
• When removing an NX Unit, remove multiple Units together which include the one you want
to remove. If you attempt to remove only one Unit, it is stuck and hard to pull out. Do not
unlock the DIN track mounting hooks on all of the NX Units at the same time. If you unlock
the DIN Track mounting hooks on all of the NX Units at the same time, all of the Units may
come off.
• When you remove a Unit, be careful not to touch or bump the pins in the NX bus connector.
1
Use a flat-blade screwdriver to pull up the DIN Track mounting hook on the Unit to remove.
DIN track mounting hook
6 - 18
Flat-blade screwdriver
NX-series EtherCAT Coupler Unit User's Manual (W519)