Backing Up Settings; Backup Functions - Omron NX-ECC201 User Manual

9-5

Backing Up Settings

This section describes how to back up the Slave Terminal settings.
9-5-1

Backup Functions

You can back up, restore, and compare Slave Terminal settings with the backup functions for the entire
NJ-series Controller. The backup functions are used when you need to replace hardware, or to change
or restore various settings in a single operation.
You can back up, restore, and compare the settings for the entire Slave Terminal, including the Commu-
nications Coupler Unit and NX Units, to either of these locations: an SD Memory Card inserted in the
CPU Unit or a specified memory device on a computer.
The functions also backup all the other data in the Controller.
Refer to the NJ-series CPU Unit Software User's Manual (Cat. No. W501-E1-06 or later) for details on
the backup functions.
The following backup functions are supported.
SD Memory Card backup function
Sysmac Studio Controller backup function
NX-series EtherCAT Coupler Unit User's Manual (W519)
Function name
9 Setting Up Slave Terminals
Backing up
Restoring data
data
Yes Yes
Yes Yes
Comparing
data
Yes
Yes
9
9 - 37