Attaching Markers - Omron NX-ECC201 User Manual

o
6-1-8

Attaching Markers

Markers can be attached to EtherCAT Coupler Units, NX Units, and terminal blocks on NX Units to
identify them.
The plastic markers made by OMRON are installed for the factory setting. The ID information can be
written on them.
Commercially available markers can also be installed.
Replace the markers made by OMRON if you use commercially available markers now.
Markers
 Installation Method
Insert the protrusions on the markers into the marker attachment locations on the EtherCAT Coupler
Units, NX Units, and terminal blocks on NX Units.
Marker
 Commercially Available Markers
Commercially available markers are made of plastic and can be printed on with a special printer.
To use commercially available markers, purchase the following products.
Product name
Markers
Special marker printer
The markers made by OMRON cannot be printed on with commercially available special printers.
NX-series EtherCAT Coupler Unit User's Manual (W519)
Marker attachment location
<Units>
Manufactured by Phoenix Contact
UC1-TMF8
UM EN BLUEMARK X1
Marker attachment location
Marker
<Terminal Block>
Model number
Manufactured by Weidmuller
DEK 5/8
PrintJet PRO
6 Installation
6
6 - 17