Maintenance Procedures; Backing Up Data - Omron NX-ECC201 User Manual

14 Maintenance and Inspection

14-2 Maintenance Procedures

This section describes the procedures for backing up the data in the EtherCAT Coupler Unit, and how
to replace the EtherCAT Coupler Unit.

14-2-1 Backing Up Data

Perform backups so that you can restore the EtherCAT Coupler Unit to its original state in the event of a
failure or other problem.
The target data to back up on the EtherCAT Coupler Unit are listed below.
• Unit configuration information
• I/O allocation information
• Unit operation settings
• Hardware switch information
• Production information
Precautions for Correct Use
The backup data for the EtherCAT Coupler Unit includes data for NX Units that store their set-
tings in the EtherCAT Coupler Unit. If you replace the EtherCAT Coupler Unit, you must restore
this data to restore the settings for these NX Units.
Refer to the 9-5 Backing Up Settings on page 9-37 for backup methods, and to the Sysmac Studio Ver-
sion 1 Operation Manual (Cat. No. W504) for the backup procedures.
14 - 4
NX-series EtherCAT Coupler Unit User's Manual (W519)