Omron NX-ECC201 User Manual page 153

Removing a Terminal Block
1
Press the lock lever on the terminal block and pull out the top of the terminal block to remove it.
Lock lever
Terminal block
Attaching a Terminal Block
1
Mount the terminal block hook on the guide at the bottom of the EtherCAT Coupler Unit and
press in on the top of the terminal block to attach it.
Only an 8-terminal terminal block can be mounted to the EtherCAT Coupler Unit.
Do not mount any other type of terminal block to prevent incorrect wire insertion.
Refer to 4-5 Terminal Block on page 4-12 for details on the different types of terminal blocks.
NX-series EtherCAT Coupler Unit User's Manual (W519)
Terminal block hook
Guide at bottom of EtherCAT Coupler Unit
7 Wiring
7
7 - 21