Omron NX-ECC201 User Manual page 238

11 EtherCAT Coupler Unit Functions
Sysmac Studio
Event Sources
The sources of events that occur in the EtherCAT Slave Terminal are listed below.
Item
Event source
Source details
Event Log Categories
This information gives the category of the event log.
You view each of these logs separately on the Sysmac Studio.
Event type
Controller event
Number of Records
Each event log can contain the following number of records. If the number of events exceeds this num-
ber, the oldest events are overwritten.
Event log
category
System event log
Access event log
11 - 14
CPU Unit
EtherCAT Master Function Module
EtherCAT node address, slot position, NX Unit number, and model number
Event log category
System log
Access log
EtherCAT Coupler
Units that store events in the
Unit
Total: 128 events
Total: 32 events
When event occurs
EtherCAT Coupler Unit
and certain NX Units:
Events are stored
in the EtherCAT Coupler Unit.
EtherCAT
Coupler Unit
Event logs
Description
Description
This is a log of the events that are detected by each Unit.
This is a log of the events that affect the Slave Terminal opera-
tion due to user actions.
Unit type
NX Unit
EtherCAT Coupler Unit
NX-series EtherCAT Coupler Unit User's Manual (W519)
Other NX Units:
Events are stored
in the NX Unit.
Units that store their own
events
Check the specifications in the
manual for each Unit.