Omron NX-ECC201 User Manual page 198

9 Setting Up Slave Terminals
 Exporting/Importing NX Unit Settings
On the Edit Slave Terminal Configuration Tab Page, you can export the Unit operating settings and
Unit application data for each NX Unit into a single file (extension .nsf).
The exported NX Unit setting file can be imported to add other NX Units with the same settings. To
do this, go into the Edit Slave Terminal Configuration Tab Page in a new project or the same project
on the Sysmac Studio.
1
On the Edit Slave Terminal Configuration Tab Page, right-click the NX Unit to export and select
Export NX Unit Settings.
The Export NX Unit Settings Dialog Box is displayed.
2
Enter a file name, and then click the Save Button.
An NX Unit setting file with an .nsf extension is saved.
To import a file, select Import NX Unit Settings and Insert New Unit in step 1, and specify the file to
import.
9 - 28
NX-series EtherCAT Coupler Unit User's Manual (W519)