When The Sysmac Studio Is Connected To The Ethercat Coupler Unit - Omron NX-ECC201 User Manual

13 Troubleshooting
13-10-2 When the Sysmac Studio Is Connected to the EtherCAT Coupler
Unit
The following flow is for troubleshooting when the Sysmac Studio is connected to the EtherCAT Coupler
Unit.
Error occurs.
TS indicator on EtherCAT
Coupler Unit lit green and
ERR indicator not lit?
Status of TS indicator
on EtherCAT Coupler
Unit?
Lit red or
flash red
Can Sysmac Studio go
online through USB port on
EtherCAT Coupler Unit?
Refer to 13-11 Trouble-
shooting When the Sysmac
Studio Cannot Go Online
on page 13-53.
13 - 52
Yes
No
Flashing green
or not lit
Refer to 13-2 Checking
for Errors and Trouble-
shooting with the Indi-
cators on page 13-3.
Yes
No
Use the troubleshooting functions
of the Sysmac Studio to trouble-
shoot the error in the EtherCAT
Coupler Unit.
Yes
TS indicator on
NX Unit lit
green?
Slave Terminal is
No
operating
normally.
Status of TS
indicator on NX
Unit?
Lit red or
Refer to the
flash red
manual for the
specific NX Unit.
Use the troubleshooting
functions of the Sysmac
Studio to troubleshoot the
error in the NX Unit.
NX-series EtherCAT Coupler Unit User's Manual (W519)
Flashing green
or not lit