Procedure For Restarting - Omron NX-ECC201 User Manual

11-7-3 Procedure for Restarting

Use the following procedure to restart all of the Units in the Slave Terminal.
Use the Sysmac Studio.
1
Go online, right-click the EtherCAT Coupler Unit in the Edit Slave Terminal Configuration Tab
Page, and select Restart.
A Restart Confirmation Dialog Box is displayed.
2
Click the Yes Button.
After the Units are restarted, a Restart Completion Dialog Box is displayed.
NX-series EtherCAT Coupler Unit User's Manual (W519)
11 EtherCAT Coupler Unit Functions
11
11 - 23