Field Service Ver. 1.0 May 2008
13.7.3
ADF FEED TEST
• To check the paper feeding in the paper take-up/transport sections in the Automatic
Function
Document Feeder.
Use
• When a document misfeed occurs
1. Load paper into the Automatic Document Feeder.
Setting/
2. Select the [1-SIDED] or [2-SIDED].
procedure
3. Press the Select key to begin testing paper feeding.
4. Press the Stop/Reset key to stop testing paper feeding.
13.7.4
COPY ADF GLASS
Function
• To check for dirt in the scanning section of the Automatic Document Feeder.
Use
• If spots appear in the copies
1. Load A4S or LetterS paper into Tray1.
2. Press the Select key to start the [COPY ADF GLASS] function.
Setting/
3. Two copy samples are fed out.
procedure
4. Check that no spots appear in the copy samples.
5. Press the Stop/Reset key to stop the [COPY ADF GLASS] function.
13.7.5
FAX RES. COPY TEST
Function
• Fax resolution copy test
Use
• To check whether the encoding/ decoding process is correct
Setting/
• The paper source is fixed to Tray1. (Tray cannot be changed.)
procedure
• When A4 or Letter is not loaded in Tray1, operation of printing is not performed.
13.7.6
SCAN TEST
Function
• To check the lighting of the Exposure Lamp and the movement of the scanner.
Use
• If the scanner malfunctions
Setting/
1. Press the Select key to begin the scanner test.
procedure
2. Press the Stop/Reset key to stop the scanner test.
13. SERVICE MODE
175