Functions Whose Settings Are Changed By Enhanced Security Mode - Konica Minolta bizhub 4750 Service Manual

Security Function Ver. 1.01 Sep. 2014
7.1.3

Functions whose settings are changed by Enhanced Security Mode

• Setting the Enhanced Security Mode to [ON] changes the setting values of the following
functions.
Function Name
Public User Access
• To permit use by a public user having no
user registration.
Print without Authentication
• To allow or restrict printing which user
and account are not specified.
User Name List
• To display the list key for User names on
user authentication screen.
Registering and Changing Address by the
user
• Select whether or not to allow the user to
register or change destinations.
SSL
• To set whether to encrypt access by
SSL.
SSL Encryption Strength
• To set the SSL encryption strength for
the SSL encryption communication.
S/MIME
• To enable/disable the S/MIME communi-
cation executing encryption for E-mail
TX.
FTP Server
• To set whether to use FTP server func-
tion or not.
SNMPv1/v2c
• To use when changing Write setting.
SNMP v3 Security Level and auth-pass-
word/priv-password
• To set the security level for the Reading/
Writing Authority User which is used for
SNMP v3.
Administrator Password Change Via
Network (Pagescope Web Connection)
Network firmware update protect
CS Remote Care
Telnet
7. Enhancing the security function
When Enhanced Security mode is
Default Setting
Restrict Restrict (not to be changed)
Restrict Restrict (not to be changed)
OFF OFF (not to be changed)
Allow Restrict (to be changed)
OFF ON (not to be changed)
AES-256,3DES, AES-256/3DES
RC4-128,DES, (not to be changed to one contain-
RC4-40 ing strength lower than AES/3DES)
S/MIME: Disable S/MIME: Enable (not to be
Digital Signature: Do changed)
not add signature Digital Signature: Select when
E-mail Text Encryp- sending
tion Method: 3DES E-mail Text Encryption Method:
3DES, AES-128, AES-192, AES-
256 (not to be changed to DES or
RC-2)
Enable Disable (Selection can be made
between [Enable] and [Disable])
Read/Write enable Only Read is enabled (not to be
changed)
Auth-password/ auth-password/priv-password
Priv-password (Selection can be made between
[auth-password] and [auth-pass-
word/priv-password])
Enabled Restrict
Invalid Valid
Usable Remote device setting disabled
OFF OFF (not to be changed)
set to [ON]
7