To Install A New Cpu - Avaya CallPilot 703t Maintenance And Diagnostics

Working with DIMMs and the CPU
Figure 32: Remove microprocessor from heat sink
7. Continue with

To install a new CPU

Caution:
Risk of electrical damage
Wear an antistatic ESD wrist strap during the entire CPU replacement process.
1. Remove the new microprocessor from its antistatic package.
154 Avaya CallPilot® 703t Server Maintenance and Diagnostics
a. Lift the lever that secures the microprocessor to the motherboard.
While applying gentle downward pressure, push the lever away from you
(towards the top of the server), and then lift it all the way to the left.
b. Remove the microprocessor, and put it in an antistatic package.
To install a new CPU
Caution:
Risk of equipment damage
on page 154.
December 2010