Make Upgrade Permanent; Remove Cd From Cd Drive - Avaya S8500 Upgrading Software And Firmware

Hide thumbs Also See for S8500:
Table of Contents

Advertisement

9
Type
arp -d 192.11.13.6
respond with one of the following:
10
Type
telnet 192.11.13.6
If you do not get a login prompt, then follow the normal escalation procedure.
Using a telephone:
11
Make test calls to verify that call processing is working.

Make upgrade permanent

1
Under Server Upgrades, click Make Upgrade Permanent.
2
Click Enter to make the partition with the new software version the permanent partition.

Remove CD from CD drive

1
Push button on the CD drive to release the CD tray.
If it does not release, go to the Maintenance Web Interface main menu. Under Server
Configuration click Eject CD-ROM.
2
Remove the software CD from the tray and close the tray.
Upgrading Software and Firmware—S8500 Configuration
December 2003
and press Enter to clear the ARP cache in the laptop. This command will
The command line prompt when the cache has been cleared.
The phrase: The specified entry was not found. This is returned when the specified IP
address does not currently contain an entry in the ARP cache.
to access the media server and verify that you can log in.
CAUTION:
If you do not commit the new software release (make it permanent), then the next time the
media server reboots, it will come up running the previous version of software. Any new
translations you may have made to the new release are lost, and the new software will
have to be installed again. Commit the new software to operation as soon as you verify
that you can log into the media server. If you do not make the upgrade permanent within
2 hours of the upgrade, an alarm is raised.
Upgrading Communication Manager—R2.0 to R2.X
33

Advertisement

Table of Contents
loading

Table of Contents