Replacing The Hdd Backplane On The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

▶ Carefully pull the 4x 3.5-inch HDD extension box out of its installation bays.
▶ Engage the locking bar, see
page 98.
Installing accessible drive dummy covers
▶ Install accessible drive filler covers into empty drive bays, see
accessible drive filler covers" on page
▶ Install accessible drive covers into the front cover, see
drive covers" on page
Concluding steps
▶ Install the fan bridge, see
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Resuming BitLocker functionality" on page
7.6.7 Replacing the HDD backplane on the 4x 3.5-inch
HDD extension box
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
"Closing the accessible drive locking bar" on
101.
102.
"Handling the fan bridge" on page
68.
68.
82.
83.
Upgrade and Maintenance Manual
"Installing accessible
92.
136. Select the
130.
Hardware: 10 minutes
"Installing
283