Hard disk drive (HDD) / solid state disk (SSD)
▶ Carefully pull the 4x 3.5-inch HDD extension box out of its installation bays.
▶ Close the locking bar, see
page
91.
Installing accessible drive dummy covers
▶ Install accessible drive filler covers into empty drive bays, see
accessible drive filler covers" on page
▶ Install accessible drive covers into the front cover, see
drive covers" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see
"Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Resuming BitLocker functionality" on page 121
7.6.6
Replacing the HDD backplane on the 4x 3.5-inch
HDD extension box
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
262
"Closing the accessible drive locking bar" on
93.
96.
66.
79.
81.
47.
Upgrade and Maintenance Manual
"Installing accessible
126. Select the
Hardware: 10 minutes
45.
48.
"Installing
TX1330 M4