Slimline Odd In 4X 3.5-Inch Hdd Extension Box; Installing The Slimline Odd; Preliminary Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Accessible drives and LSD
12.7 Slimline ODD in 4x 3.5-inch HDD extension
box

12.7.1 Installing the slimline ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)

12.7.1.1 Preliminary steps

"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
I
The front cover only needs to be removed in order to remove or install
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install a slimline
ODD or LSD module, the front cover can remain installed.
"Removing the system fan holder" on page 76
Ê
"Removing an HDD extension box" on page 179
Ê
316 Upgrade and Maintenance Manual
Hardware: 10 minutes
(if applicable)
TX150 S8 / TX200 S7