Show Ip Arp Inspection Configuration - Edge-Core ECS4120-28F Reference Manual

Chapter 9
| General Security Measures
ARP Inspection
show ip arp inspection
configuration
show ip arp inspection
interface
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ip arp inspection trust
Console(config-if)#
This command displays the global configuration settings for ARP Inspection.
Command Mode
Privileged Exec
Example
Console#show ip arp inspection configuration
ARP Inspection Global Information:
Global IP ARP Inspection Status : disabled
Log Message Interval
Log Message Number
Need Additional Validation(s)
Additional Validation Type
Console#
This command shows the trust status and ARP Inspection rate limit for ports.
Syntax
show ip arp inspection interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#show ip arp inspection interface ethernet 1/1
Port Number Trust Status
------------- --------------------
Eth 1/1 Trusted
Console#
: 10 s
: 1
: Yes
: Destination MAC address
------------------------------
– 350 –
Rate Limit (pps)
150