Show Ip Arp Inspection Configuration; Show Ip Arp Inspection Interface - Edge-Core ECS4810-12M Layer 2 Management Manual

| General Security Measures
C 26
HAPTER
ARP Inspection
show ip arp
inspection
configuration
show ip arp
inspection interface
This command displays the global configuration settings for ARP
Inspection.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip arp inspection configuration
ARP inspection global information:
Global IP ARP Inspection status : disabled
Log Message Interval
Log Message Number
Need Additional Validation(s)
Additional Validation Type
Console#
This command shows the trust status and ARP Inspection rate limit for
ports.
S
YNTAX
show ip arp inspection interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip arp inspection interface ethernet 1/1
Port Number Trust Status
------------- --------------------
Eth 1/1 trusted
Console#
– 790 –
: 10 s
: 1
: Yes
: Destination MAC address
Limit Rate (pps)
------------------------------
150