Show Ip Arp Inspection Configuration - Edge-Core AS6700-32X Cli Reference Manual

Chapter 8
| General Security Measures
ARP Inspection
show ip arp inspection
configuration
show ip arp inspection
interface
This command displays the global configuration settings for ARP Inspection.
Command Mode
Privileged Exec
Example
Console#show ip arp inspection configuration
ARP Inspection Global Information:
Global IP ARP Inspection Status : disabled
Log Message Interval
Log Message Number
Need Additional Validation(s)
Additional Validation Type
Console#
This command shows the trust status and ARP Inspection rate limit for ports.
Syntax
show ip arp inspection interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
Command Mode
Privileged Exec
Example
Console#show ip arp inspection interface ethernet 1/1
Port Number Trust Status
-------------- --------------------
Eth 1/1 Trusted
Console#
: 10 s
: 1
: Yes
: Destination MAC address
------------------------------
– 328 –
Rate Limit (pps)
150